// *****************************************************************************
// * Config_SIOC ver 3.7B1   -     By Manolo Vélez    -    www.opencockpits.com
// *****************************************************************************
// * FileName : Overhead_gaugesPMSystem.txt
// * Date : 2011-09-23



Var 0002, name TXRX_APU, Link FSUIPC_INOUT, Offset $5604, Length 2
{
  L0 = &TXRX_APU / 10     // reads offset - reduces TXRX to 10%
  L0 = L0 * -1     // changes needle direction - now negative
  L0 = L0 * 0.8     // scales the needle movement down
  L0 = L0 + 1023     // turns output to positive
  &SERVO_APU = L0         // sends value to servo
}

Var 0004, name TXRX_CabAlt, Link FSUIPC_INOUT, Offset $56A6, Length 2
{
  L0 = &TXRX_CabAlt    
  L0 = L0 * -1
  L0 = L0 * 0.9     // scales the needle movement down
  L0 = L0 + 1023     // turns output to positive
  &SERVO_CabAlt = L0    
}

Var 0006, name TXRX_CabTemp, Link FSUIPC_INOUT, Offset $567E, Length 2
{
  L0 = &TXRX_CabTemp    
  L0 = L0 * -1
  L0 = L0 * 1.1
  L0 = L0 + 1023
  &SERVO_CabTemp = L0    
}

Var 0008, name TXRX_CabVSI, Link FSUIPC_INOUT, Offset $56A4, Length 2
{
  L0 = &TXRX_CabVSI    
  L0 = L0 * -1
  L0 = L0 * 1.1
  L0 = L0 + 1023
  &SERVO_CabVSI = L0    
}

Var 0010, name TXRX_FuelTemp, Link FSUIPC_INOUT, Offset $56B6, Length 2
{
  L0 = &TXRX_FuelTemp         // clashes with cabintemp
  L0 = L0 * -1
  L0 = L0 * 1
  L0 = L0 + 1023
  &SERVO_FuelTemp = 500    
}

Var 0012, name TXRX_PresDiff, Link FSUIPC_INOUT, Offset $56B8, Length 2
{
  L0 = &TXRX_PresDiff    
  L0 = L0 * -1
  L0 = L0 * 0.9
  L0 = L0 + 1023
  &SERVO_PresDiff = L0    
}

Var 0014, name TXRX_PressL, Link FSUIPC_INOUT, Offset $567A, Length 2
{
  L0 = &TXRX_PressL    
  L0 = L0 * -1
  L0 = L0 * 1.5
  L0 = L0 + 1023
  &SERVO_PressL = L0    
}

Var 0016, name TXRX_PressR, Link FSUIPC_INOUT, Offset $567C, Length 2
{
  L0 = &TXRX_PressR    
  L0 = L0 * -1
  L0 = L0 * 1.6
  L0 = L0 + 950
  &SERVO_PressR = L0    
}

Var 0018, name TXRX_BRKpress, Link FSUIPC_INOUT, Offset $6DCB, Length 2
{
  L0 = &TXRX_PressR    
  L0 = L0 * -1
  L0 = L0 * 1.6
  L0 = L0 + 950
  &SERVO_PressR = L0    
}

Var 0001, name SERVO_APU, Link USB_SERVOS, Device 1, Output 2, PosL 0, PosC 598, PosR 1023, Type 1     // APU EGT

Var 0003, name SERVO_CabAlt, Link USB_SERVOS, Device 2, Output 5, PosL 187, PosC 324, PosR 1023, Type 1     // Cabin alt

Var 0005, name SERVO_CabTemp, Link USB_SERVOS, Device 1, Output 1, PosL 0, PosC 511, PosR 1023, Type 1     // Cabin tem

Var 0007, name SERVO_CabVSI, Link USB_SERVOS, Device 2, Output 6, PosL 0, PosC 511, PosR 1023, Type 1     // Cabin VSI

Var 0009, name SERVO_FuelTemp, Link USB_SERVOS, Device 2, Output 1, PosL 0, PosC 511, PosR 1023, Type 1     // Fuel Tem

Var 0011, name SERVO_PresDiff, Link USB_SERVOS, Device 2, Output 4, PosL 192, PosC 511, PosR 1023, Type 1     // Pressur

Var 0013, name SERVO_PressL, Link USB_SERVOS, Device 2, Output 3, PosL 182, PosC 537, PosR 952, Type 1     // Pressure L

Var 0015, name SERVO_PressR, Link USB_SERVOS, Device 2, Output 2, PosL 180, PosC 537, PosR 1003, Type 1     // Pressure 

Var 0017, name SERVO_BRKpress, Link USB_SERVOS, Device 1, Output 6, PosL 1003, PosC 496, PosR 80, Type 1     // TSR BRAK